|
Particle Suction Arms
Chen Climate Control carries out a variety of projects for factories and companies in industry. The projects meet all the necessary standards and are a great help to the clients.
Among the projects that our company is carrying out are:
A system of suction and removal of odors by means of active charcoal, with three layers of multi-grade filtering promotion. The system includes a blower within a sound dampening cell to keep the noise level low. The planning and the installations are carried out according to the conditions in the field and according to the client’s needs.
|
 |
| For more information |
|
|
Carpentry Shops
A multi-cyclonic separation system for suction and separation of dust with a 75 horsepower centrifugal blower.
Output of 25,000 cubic meters per hour at a pressure of 400 millimeters for a level of filtering of 98%, from 7 microns and up—including a drainage compartment for quick emptying.
|
 |
| For more information |
|
|
|
Scrubbers for Gases
Chen Climate Control plans and installs systems for suctioning and removal of odors. The systems include flues of differing diameters and lengths, according to the need, without hangers and support. |
 |
| For more information |
|
|
|
|
Restaurants and Food establishments
Exhaust systems for kitchens and factories, for removal of heat, steam, odors, smoke and gases. The systems come in different sizes, according to the type of substance and the needs of the client.
To receive additional information click here or contact us.
|
 |
| |
|
|
|
|
Absolute filtration
Washable electrostatic filters – gas filters for 98% efficiency from 0.01 microns and up, with no pressure drop in the system. Our company offers a range of possibilities: Commercial units for homes and offices Industrial units: 2,500 to 13,000 cubic meters per hour A line of products for the welding industry Particle Suction Arms Electrostatic filters for highest quality filtering
|
 |
|
|
|
|
|
Waste paper
Cyclone separation systems for many industrial sectors, for the suction and separation of a variety of materials: dust, metals, wood, plastic, paper and more. The systems include drainage compartments for quick emptying. |
 |
|
|
|
|
|
Dry systems for dealing with dust
Design, manufacture and installation of all types of blowers, including ductwork connections for suctioning out and insertion of air under any condition and according to the needs of the client. Duct blowers, IN-LINE, installed in ductwork, with capacities of 150 to 14,500 cubic meters per hour (within noise reduction chambers).
|
 |
|
|
|
|
Filtering and collection of shavings and chips
Pedestal fans for industry and for all purposes. Available with 12 to 50 inch bases and air supply ranges of 100 to 60,000 cubic meters per hour. |
 |
|
|
|
|
Painting Booths
Dry and wet chambers for filtering, also intended for painting booths. |
 |
|
|
|
|
Centrifugal blowers
Centrifugal blowers in all sizes and types: intake, exhaust, radial, 2 PVC inlets, direct drive, belt drive. |
 |
|
|
|
|
Radial blowers
The blowers are made of the best materials, resistant to chemicals, and with maximum temperature ranging from 250 to 400 degrees Celsius. |
 |
|
|
|
|
|
|
Smoke removal blowers
Axial roof blowers, model RF-750 – the most efficient ventilation for removal of heat, fumes and smoke (according to Fire Department standards). Vertical exhaust to eliminate capacity losses on roofs of asbestos, corrugated steel and insulation materials. The blower motors run at 700 RPM for maintaining low noise levels and to eliminate safety dangers due to tremors and imbalance.
|
 |
|
|
|
|
|
|
Scrubbers for Dust
Design, manufacture and installation of units for the suction and filtration of gases (Scrubbers), by way of closed loop scrubbing – according to the demands of the Ministry of Environmental Protection. To receive additional information click here or contact us.
|
 |
| |
|
